Honda VFR800F 2014 Service Manual page 378

BATTE RY/CHARG
I
NG SYSTEM
BATTERY
REMOVAL/INSTALLATION
Remove the
battery cover (page 2-3).
Turn the ignition switch OFF.
Disconnect
the
negative
(-)
cable [1] first and
then
disconnect
the positive (+) cable [2] by
removing
the
terminal bolts.
Remove the rubber strap [3] and the
battery
[4].
lnstallation
is in the reverse order of removal.
NOTE:
.
Connect
the
positive (+) cable first, then connect the
negative
(-)
cable.
.
For digital clock setting procedure (page 20-12).
VOLTAGE INSPEGTION
Remove the
battery cover (page 2-3).
Measure the battery voltage using a digital multimeter.
voLTAGE (20'C/68'F):
Fully charged:
13.0
- 13.2V
Needs
charging: Below 12.4V
NOTE:
.
Voltage fluctuates
just after
charging;
wait
at
least
30 minutes before measuring.
BATTERY TESTING
Remove
the battery (page
19-6).
Refer
to the
instructions
that are
appropriate
to
the
battery
testing equipment available to you.
TOOL:
Battery tester Micro 404XL (U.S.A. only)
BATTERY CHARGING (U.S.A. only)
Remove
the
battery
(page
19-6).
Refer
to the
instructions
that are
appropriate
to
the
battery charging equipment available to you
TOOL:
Ghristie baftery
charger
MC1012|2T (U.S.A. only)
or
OptiMate Pro-S
(U.S.A. only)
19-6