Shining 3D EXScan H User Manual page 66

Mesh optimization
Optimization
Filter
Smooth
Remove small
floating parts
Simplification
Max triangles
Fill small hole
Instruction
Optimize the data and improve the
clarity of the data. The higher the level,
the less the small details .
Smooth the possible noise on the
surface of the scan data.
Remove small floating parts on the
model.
Select to reduce the polygon numbers,
file size and detail of data while
meshing.
Set max plate number to get mesh
model's triangle plate number is within
configured plate number.
Auto fill the small hole when mesh.
Note
- None: No optimization
- Low: Optimizes data slightly and preserves
data characteristics
- Med: Reduce the noise on the surface of the
scan data
- High: Reduce the noise on the surface of the
scan data and sharpen it powerfully.
- Resolution <= 0.5mm, simplification will be
selected by default.
- Resolution > 0.5mm, simplification will be
deselected by default.
Default value 10mm, for objects with holes
(smaller than 10 mm), please set the function
parameter value to a smaller one.