5500 S
M
P
erieS
anual
4.10.
Units
The units can be changed from 'M' metric to 'I' imperial. This affects the pressure readings. "M" reads in
mbar, and "I" reads in inches of water column. The temperature settings are always in Celsius.
4.11.
Temp Enabled
TEMP ENABLED allows for temperature alarm/control when ON. TEMP ENABLED and NUMBER OF
PT100 has to be selected for temperature alarm/control to be effective. If one is selected and another is
not, a PT100 LED fault LED will be on
60
rograMMing
UNITS
SET
UNITS
M
I
SET
TEMP
ENABLED
SET
TEMP
ON
OFF
SET