AEG Protect C 1000 LCD+ User Manual page 70

70
Submenu
Ambient temperature
alarm
Battery remaining
time
Date and time
LCD contrast
Modbus TCP
Control commands
Battery saving mode
REPO input polarity
Reset Consumption
Bat % to restart
If the load type is a transformer type, it is recommended to enable
the "start from bypass" function.
Available settings
[enabled], [disabled]
[enabled], [disabled]
dd/mm/yyyy hh:mm
[-5 ~ +5]
[enabled], [disabled]
[enabled], [disabled]
[disabled], [10%], [20%], ..., [100%]
[normally open], [normally closed]
When "yes" is selected the Cumulative
Consumption kWh value is cleared and
the Date & Time stamp for this statistic
is set to the current date & time.
[0%], [10%], [20%], ..., [100%]
Default settings
enabled
enabled
01/01/2020 00:00
[0]
disabled
enabled
disabled
Normally closed
"no"
0%