2. Put your fingers on the pocket on the right side of the printer, unlock the scanner cover, and
remove it upward.
3. Put your fingers on the tab marked "Pull Open," and pull down the scanner unit.
Note:
When pulling down the scanner unit, avoid knocking it against the table or anything else to protect it
from an excessive impact.
4. With the cleaning sheet in the position shown in the illustration on the left, insert it into the
gap between A and B shown in the illustration on the right.
Rev. F
Figure 3-13 Removing the scanner cover
Figure 3-14 Opening the scanner unit
A
B
Figure 3-15 Inserting the cleaning sheet
TM-J9000/J9100 Technical Reference Guide
Operation 3-13