Installing Nic Modules (Optional) - Lanner NCA-2523 User Manual

NCA-2523 User Manual

Installing NIC Modules (Optional)

NCA-2523 comes with one NIC module slot for expansion. Follow the steps for installation.
1. Locate the NIC module slot on the front panel of the system.
2. Rotate clockwise and loosen the two lock-screws,
and remove the NIC module slot door.
4. Insert your NIC module. (The module shown here
is for reference only.)
5. Once the module is firmly seated, rotate counter-
clockwise and tighten the two lock screws.
31