Installing M.2 Modules - Lanner NCA-4025 User Manual

NCA-4025 User Manual

Installing M.2 Modules

This system supports two M.2 module slots that can accommodate various module sizes.
1x M.2-3042, B key or B+M Key (Optional) via PCIEx1/USB3.0/SATA3 interface.
1x M.2-3042/3080/30110, B key or B+M key (Optional) via PCIEx1/USB3.0/SATA3 interface
To install the M.2 module
1. Align the notch of the module with the socket key in the slot, and insert it at 30 degrees into the socket
until it is fully seated in the connector.
2. Push down the module and secure it with the screw that comes with it.
For a 4G-LTE module, you also need to insert the nano-SIM card into the corresponding slot.
M.2
Slot
31