Lanner NCA-2523 User Manual page 33

NCA-2523 User Manual
Installing PGN Cable to PGN Bracket
1. Hold the PGN bracket and insert the PGN
cable to the bottom section, and secure with
two (2) screws.
2. Insert the PGN bracket into the disk tray
bracket, and secure with four (4) screws.
3. Insert the PGN cable into the corresponding
connector on the motherboard.
Installing PGN Module
1. Locate the PGN module slot on the front panel of the system.
2. Insert the PGN module.
33