Table of Contents
Advertisement
NCA-2523 User Manual
9. For the rear rack installation, slide
the rail to aim and engage the bolts
on the rail's rear end with the two
available holes on the post, and the
rail assembly will click into place.
10. Stretch both of the Inner Rails out
to their fullest extent. You will
hear a click sound when they are
fully stretched and locked.
11. Hold the system with its front
facing you, lift the chassis and
gently engage the brackets on the
system while aligning them with
the Inner Rails as shown in the
image, and then push the system
into the cabinet.
40
Click
Click
The Inner Rail will click
when it is fully stretched.
Advertisement
Table of Contents
