Handling And Unpacking - Emerson Branson 2000X Original Instructions Manual

5.2

Handling and Unpacking

If there are any visible signs of damage to the shipping containers or the product, or you
later discover hidden damage, NOTIFY YOUR CARRIER IMMEDIATELY. Save the packing
material.
1. Unpack the 2000X-series components as soon as they arrive. Refer to the following procedure
2. Verify you have all of the equipment ordered. Some components are packed inside other boxes
3. Inspect the controls, indicators, and surfaces for signs of damage
4. Save all packing material. Evaluation systems will be returned using this packing material
5.2.1 Actuator
The Actuator and interface box are shipped assembled and ready to install.
1. Move the shipping container close to the intended installation location, leave it on the floor
2. Unpack the actuator, interface box, cables, and tool kit from their cardboard box and set the box
aside
3. The converter and/or booster are shipped in a separate shipping box(es). Unpack the converter
and/or booster from their packages
4. Save the packing material
NOTICE
NOTICE
100-412-182 REV. 06
The Actuator and Interface Box are a matched set, and must be kept
together. They must no be interchanged with other micro systems.
The packaging may also include the converter and/or booster, if
ordered.
43