Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
and apply to any authorized service center from
the contact address list given in the warranty
certificate and on the website www.vitek.ru.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY. ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
USING THE HAIRDRYER
After unit transportation or storage at low
temperature it is necessary to keep it for at
least three hours at room temperature before
switching on.
•
Unpack the unit and remove any advertising
stickers that can prevent the unit operation.
Unwind the power cord completely.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
Insert the power plug into the mains socket.
•
The unit is intended for operation with AC sys-
tem and 50 or 60 Hz frequency. The unit does
not need any additional settings for operating
with the required nominal frequency.
Switching hair dryer on
Before switching hairdryer on, make sure that your
home mains voltage corresponds to the hairdryer
operating voltage.
•
Insert power cord plug into wall outlet.
•
Use the switch (5) to set the required air supply
temperature and speed:
0 – the hairdryer is switched off;
1 – low speed and low heat;
2 – high speed and high heat;
– cool shot button.
•
Press and hold the cool shot button (4) «
fix your hairstyle.
•
To resume hot air supply, release the button
(4) «
».
Taking care about your hair
Before drying and setting your hair, wash them
with shampoo, dry with towel to remove excessive
moisture and brush for better results.
Fast drying
Set the switch (5) to the maximal heating posi-
tion (position 2) and dry the hair. Shake off ex-
cessive moisture from the hair with your hand or
a comb and constantly move the hairdryer above
your hair.
Nozzle attachment
Attach the nozzle (1) to the hairdryer body (2).
The nozzle (1) allows you to direct the airflow to
the hair you are styling.
Straightening your hair
Set the switch (5) to the maximal heating position
(position 2) and preliminarily dry the hair. When
the hair is almost dry, set the nozzle (1), decrease
the air heating degree using the switch (5).
Divide your hair into locks and layers and start
straightening from the lower layers. Using a plain
or a round comb, brush the hair downwards and
simultaneously direct hot air from the nozzle (1) at
your hair. In this way, slowly straighten each lock
from root to end. After you finish straightening the
locks of the lower hair layer, start straightening the
locks of the middle layer and finish with the locks
of the upper hair layer.
Natural waving structure of your hair
Set the switch (5) to the low heating position (po-
sition 1), grip locks between fingers, turn them
in the direction of natural curling and dry them,
directing air between fingers. When the required
effect is achieved, press and hold down the cool
shot button (4) «
Styling your hair
Set the switch (5) to the low heating position and
set the nozzle (1) for directed air flow.
Divide your hair into locks and start creating hair-
style you need using round brush for setting hair.
While styling, direct airflow straight on your hair in
any direction you want.
If necessary, direct air jet on each lock for 2-5 sec-
» to
onds to fix it. Time of setting locks you should de-
termine on your own taking into account type of
your hair.
«Cool» air supply
This model has a cool shot function for fixing
your hairstyle. Press and hold down the cool
shot button (4) «
ated style.
PROTECTION AGAINST OVERHEATING
This hairdryer has overheating protection that
switches the unit off if the outgoing air is too hot.
8
» and fix each lock.
» - it enables to keep the cre-
Advertisement
Table of Contents
