Machine Settings
> To minimize the loops of the looper thread at the fabric edge, turn the mtc micro thread control in «-»
6.10 Setting the presser foot pressure
The Presser Foot Pressure of the machine is set in the default value "4" so that it is suitable for sewing
medium-weight fabrics. Most materials do not require any adjustment of the Presser Foot Pressure. However,
there are some cases where an adjustment is necessary, for example when sewing very light or heavy fabrics.
1
2
3
> To set the optimal presser foot pressure for your sewing project, perform a sewing test.
> Reduce the presser foot pressure for light fabrics.
> Increase the presser foot pressure for heavy fabrics.
> To increase the presser foot pressure, set the presser foot pressure wheel to a higher value.
> To reduce the presser foot pressure, set the presser foot pressure wheel to a lower value.
76
direction during sewing.
Extra-light
Light
Medium-light
4
Default value
5
Medium-high
6
High