Machine; Cleaning The Machine; Cleaning The Looper Area - Bernina L 890 QUILTERS EDITION User Manual

10.2 Machine

Cleaning the Machine

The service life of the machine depends on the care and maintenance. Based on normal household use, an
annual service at the authorized BERNINA dealer is recommended.
Recommended aids:
• Damp Cloth
• Brush
• Tweezers
• Vacuum Cleaner with Soft Tip
Clean recommended machine areas:
• Needle, Needle Bar
• Presser Foot
• Feed Dog (from above)
• Knife
• Freearm Interior
> The machine can be cleaned with a damp cloth without detergent.
> Regularly free the recommended areas from dust, fabric scraps and thread remnants.

Cleaning the looper area

Dust, fabric and thread remnants accumulate in the looper area during overlocking and these must be
removed regularly.
Prerequisite:
• The machine is switched off.
• The presser foot is raised.
• The needles are in the top position.
> Remove the presser foot.
> Remove the screws of the stitch plate with the Torx screwdriver.
> Unscrew the stitch plate from the freearm.
> Remove the cleaning cover on the freearm.
Care and Maintenance
107