2.5 Needle Area
Needle Holder
The needle holder can hold five needles. The machine is designed for needles of the ELx705 system. Needle
sizes between 70-90 are to be used for this machine. (see page 56)
Needles for Coverstitches
«LC» Left coverstitch needle for coverstitches and chainstitches.
«CC» Center coverstitch needle for coverstitches and chainstitches.
«RC» right coverstitch needle for coverstitches and chain stitches.
Needles for Overlock Stitches
«LN» Left needle for overlock stitches.
«RN» Right needle for overlock stitches.
Changing the Needle
The use of the needle inserter is recommended and prevents the needle from falling into the feed dog area.
(see page 23)
Correctly inserted needles are not at the same height.
The needle holder screws must always be tightened, even if no needles are inserted. This prevents the needle
holding screws from falling out because of vibrations.
Damage due to Excessive Tightening of the Screws
NOTICE
The threads of the needle holder may be damaged. A repair by the authorized BERNINA dealer is required.
> Do not overtighten the needle screws.
Prerequisite:
•
The needles are in the top position.
•
The presser foot is up and swung out.
Setting Up the Machine
41