Bernina L 890 QUILTERS EDITION User Manual page 33

Stitch view
Any changes in this stitch view directly affect the stitch and the machine. All displayed values are set by the
machine accordingly.
3
4
5
6
2
1 «Stitch Number/Name»
2 «Stitch View»
3 «Thread Tension»
4 «Needle Stop Up/Down»
5 «Stitch Length»
6 «Differential Feed»
7 «Stitch Optimizer»
8 «Sewing Speed Adjustment»
Setting with a direct effect on the stitch
• Stitch length setting. (see page 77)
• Differential Feed setting. (see page 71)
• Thread tension adjustment setting. (see page 70)
These settings, or any modifications to them, are stored in the personal memory when the stitch is saved.
Functions With a Direct Effect on the Machine
• Needle stop up/down. (see page 44)
• Sewing speed setting. (see page 50)
These settings or any changes to them, remain active until they are changed again.
1
7 8
Shows the currently set stitch name with the stitch
number.
Shows the currently set stitch pattern. Can include
multiple views (schematic / real or exploded e.g. flat
seam). The dots refer to hidden views. Tap to switch
views.
Shows the preset default thread tension value for
each required thread path. Tap to change.
Indicates the position of the needle when the needle
stops. Tap to change.
Indicates the stitch length. Tap to change.
Indicates the preset default value of the Differential
Feed. Tap to change.
Shows possible stitch results with the setting actions
for stitch optimization. Tap to use.
Determines the maximum sewing speed with the foot
control pressed down. Tap to change.
My BERNINA overlocker
33