Setting Up the Machine
Attaching/Removing the Knee Llifter
Temporarily lifting the presser foot using the knee lifter allows to position the sewing project with both
hands.
> To attach the knee lifter, push the knee lifter engaging cam in a horizontal position into the knee lifter
> To remove the knee lifter, pull the knee lifter out of the knee lifter connection without swinging the knee
The swing-out position of the knee lifter can be adjusted at an authorized BERNINA dealer if required.
Attaching/Removing the Cut-offs Bin
The cut-offs bin catches the fabric scraps during the sewing process.
> To attach the cut-offs bin, hook the cut-offs bin into the snap-in opening on the looper cover.
> To remove the cut-offs bin, lift the cut-offs bin out of the snap-in opening on the looper cover.
Attaching/Removing the Freearm Cover
The freearm is ideal when working with tubular, closed projects such as cuffs, trouser hems or sleeve ends.
The freearm cover closes the gap between the stitch plate and the sewing surface.
Prerequisite:
•
> To attach the freearm cover, push the freearm cover along the guide rails from the left until it engages.
48
connection until it stops.
lifter sideways.
The slide-on table is removed.