Bluetooth; General Information; Source Selection; Setting Up Audio Transfer - T+A PSD 3100 HV User Manual

Bluetooth

General information

The PSD 3100 HV integral Bluetooth interface provides a means of transferring music wirelessly from de-
vices such as smart-phones, tablet PCs, etc. to the PSD 3100 HV.

Source selection

Select the source Bluetooth with the source selection button BT on the F3100 or by turning
the SOURCE / VOLUME knob on the front panel of the PSD 3100 HV.

Setting up audio transfer

Before music from a Bluetooth-capable device can be
played through the PSD 3100 HV, the external device
must first be registered to the PSD 3100 HV. As long as
the PSD 3100 HV is switched on and no device is connec-
ted, it is always ready to receive. In this state the screen
displays the message not connected.
To establish a connection, carry out the following steps:
• Start the search for Bluetooth devices on your mobile device.
• If the PSD 3100 HV is found, select it for pairing.
If the connection is successfully established, the device name of the connected device is shown at the
bottom right of the display.

Playback

Information on the piece of music currently being played is displayed on the screen of the PSD 3100 HV if
this function is supported by the device connected to the unit.
The behaviour and method of operating the connected mobile device are determined by the device itself.
Usually, playback can be controlled via the buttons on the remote control (start/stop, pause, skip).
To control the PSD 3100 HV the mobile device must be conform to the Bluetooth AVRCP protocol.
j
44
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries,
used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the
United States and other countries, used with permission