Table of Contents
Advertisement
Left rotary knob
Pre volume after
power on
Display Brightness
(Screen Brightness)
Display mode
Language
Device name
j
24
Under this menu item you can define the main function of the left rotary knob. The set
main function can be operated without pressing the knob first. For the second function,
the knob must be pressed briefly first.
Select „Volume/Source" when volume control should be the main function or select
„Source/Volume" if source selection is the preferred main function.
Here you can select whether the PSD 3100 HV is switched on with the volume selected
before switching off, a maximum permissible volume or always the same volume.
Unchanged
If this setting is selected, the device is switched on with the volume
before switching off.
Limited
With this setting, a maximum permissible volume can be set under the menu item
„Value".
permissible volume after switching on can be defined under the menu item „Value".
Fixed value
If this option is activated, the PSD 3100 HV always switches on with the volume value
set under the
menu item „Value"
At this point you can adjust the brightness of the integral screen to suit your personal
preference for normal use.
This menu item offers the choice between three different display operation modes:
•
Always on
•
Temporary
•
Always off
Selecting ‚Temporary' will switch the display is on for a short while each time the
PSD 3100 HV is being operated. Shortly after operation the display will be switched
off again automatically.
In this menu item you define the language to be used for the displays on the screen of
the front panel of the PSD 3100 HV.
The language used for data transferred to the machine, e.g. from an Internet radio sta-
tion, is determined by the supplying device or the radio station; you cannot define the
language on the PSD 3100 HV.
This menu point can be used to assign an individual name to the PSD 3100 HV. In a home
network the device then appears under this name.
If the device is integrated into an Apple Home environment, the device name can only be
changed via the Apple Home app.
Advertisement
Table of Contents
