Firmware Update; General Information; Update Procedure - T+A PSD 3100 HV User Manual

Firmware update

General information

The PSD 3100 HV is software-based in many functions. New updates and functions will be made available
from time to time.
We recommend updating the software before using the PSD 3100 HV for the first time. To keep the device
always up to date later, new updates should be checked occasionally.
The following section describes the exact method of updating the firmware in detail.
To avoid malfunctions after updating the PSD 3100 HV, all devices in the system should always be checked for
j
any available updates and installed if they are available.

Update procedure

• The basic requirement is a functioning network with router and access to a broadband Internet connec-
tion; the system must be operating.
• Switch the machine on.
• Call up the System menu by pressing the
• Rotate the SELECT knob on the front panel to select the Device info menu point, and confirm your selec-
tion by pressing the SELECT knob.
• Select the Update menu point by rotating the SELECT knob, then press the SELECT knob to confirm your
choice.
• The select option WEB should now be active (highlighted).
• The firmware update can now be started by pressing the SELECT knob.
• The screen displays the current state of progress of the update.
• Once the update has been completed (duration 10 - 30 minutes) the device automatically switches itself
off and restarts.
• When the machine has restarted, the update is complete.
• To ensure that the update was successful, access the Device Info menu point mentioned above, and
check the new firmware status.
Instead of starting the update process directly on the device, it is also possible to operate the update process
j
via the F3100 remote control.
button on the front panel.
53