Brake Disc Removal And Installation - Suzuki LT-R450K6 Instruction Manual

CHASSI S 7-63
BRAKE DlSC REMOVAL AND INSTALLATION
REMOVAL
Remove the rear wheel. ( D 7 - 1 0 )
Remove the rear axle. ( W 7 - 9 2 )
Remove the brake disc.
INSTALLATION
lnstall the brake disc to the rear axle.
NOTE:
Make sure that the disc is free of
any
greasy matter.
Apply THREAD LOCK SUPER "1360" to the brake disc bolts
and tighten them to the specified torque.
-99000-32130: THREAD LOCK SUPER "1360
C]
Brake disc bolt: 23 N.m ( 2 . 3
kgf-rn,
16.5
lb-tt)
Install the rear axle. ( W 7 - 9 8 )
Install the rear wheel. (-7-14)
?\\Y
\r
- - ~
-
BRAKE DlSC INSPECTION
Inspect the brake disc for cracks or damage and measure the
z . - a .
thickness using the micrometer. If any defects are found or if the
? ' - , - I
?
&
n'
thickness is less than the service limit, replace the brake disc
-
' 7 '
with a new one.
&
09900-20205: Micrometer (0
-
25 mm)
Brake disc thickness
Servlce Limit: 3 . 5 mm (0.138 in)
Remove the brake caliper.
( W 7 - 5 7 )
Measure the runout using the dial gauge. If the runout exceeds
the service limit, replace the brake disc with a new one.
09900-20607: Dial gauge (11100 mm)
09900-20701: Magnetic stand
Brake dlsc runout
Servlce Llmlt: 0.3 mm (0.012 In)
Install the brake caliper.
( W 7 - 6 1 )