Brake Caliper Reassembly And Installation - Suzuki LT-R450K6 Instruction Manual

BRAKE CALIPER REASSEMBLY AND
INSTALLATION
Reassemble and install the brake caliper in the reverse order of
removal and disassembly. Pay attention to the following points:
Clean the caliper bores and pistons with the specified brake
fluid. Thoroughly clean the dust seal grooves and piston seal
grooves.
B-Speclflcation and classlficatlon: DOT 4
L C ~ T I O N ~
-
~~
1
Clean the brake caliper components with fresh brake
fluid before reassembly.
Do not wipe the brake fluld off after cleanlng the
components.
'When cleanlng the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvents such as gasoline, kerosine or oth-
ers.
'
Replace the removed piston seals and dust seals
with new ones.
Apply brake fluid to all of the seals, brake callper
bores and pistons before reassembly.
PISTON SEAL
Install the piston seals
,TI
and dust seals
(2)
as shown.
BRAKE CALIPER HOLDER
Apply SUZUKl SILICONE GREASE to the brake caliper
holder pins.
&
99000-25100: SUZUKl SILICONE GREASE
b