Suzuki LT-R450K6 Instruction Manual page 152

NOTE:
The above form is a standard sample. The form should be modified according to conditions and characteris-
tics of each market.
VEHlCLElENVlRONMENTAL CONDITION WHEN
-
PROBLEM OCCURS
Environmental condition
VISUAL INSPECTION
Prior to diagnosis using the mode select switch or SDS, perform the following visual inspections. The rea-
son for visual inspection is that mechanical failures (such as oil leakage) cannot be displayed on the indi-
cator panel with the use of mode select switch or SDS.
Engine oil level and leakage (-2-13)
"
Engine coolant level and leakage ( 0 2 - 1 5 )
Fuel level and leakage (-2-1 1 and
8-25)
Clogged air cleaner element
(C72-3)
Battery condition ( 0 8 - 3 1 )
Throttle cable play ( W 2 - 1 1 )
Vacuum hoses looseness, bend and disconnection
Burnt fuse
FI light operation (-4-16 and 8-23)
Each warning light operalion ( W 8 - 2 3 to -25)
+
Exhaust gas leakage and noise ( C 7 2 - 4 )
Each coupler disconnection
+
Clogged radiator fins ( p 6 - 6 )
Weather
Temperature
Frequency
Road
Engine condition
Vehicle condition
Fair Cloudy Rain
n
Snow
n
Always Other
Hot Warm Cool
Cold (
"C1 "F)
n
Always
0
Always
Sometimes (
times1 day, month) Only once
Under certain condition
Urban Suburb Highway Mountainous (0 Uphill Downhill)
Tarmacadam Gravel Other
Vehicle condition
Cold Warming up phase Warmed up Always Other at starting
Immediately after start Racing without load Engine speed ( rlmin)
During driving: Constant speed Accelerating Decelerating
Right hand corner
Left hand corner
13
At stop Vehicle speed when problem occurs ( kmih, milelh)
Other