Suzuki LT-R450K6 Instruction Manual page 273

Tighten the wishbone arm pivot nuts to the specified torque.
Wishbone arm pivot nut: 65 N.m (6.5 kgf-m, 47.0 lb-ft)
Install the washer
ii).
Tighten the tie rod end nut
(2)
to the specified torque.
Tie rod end nut: 23 N.m (2.3 kgf-m, 16.5 lb-R)
Install the cotter pin.
L ~ _ A u T ~
Replace the removed cotter pin with a new one.
Apply THREAD LOCK SUPER "1360" to the disc cover
mounting bolts, and then tighten the bolts.
a 9 9 0 0 0 - 3 2 1 3 0 : THREAD LOCK SUPER "1360"
Install the brake caliper. ( W 7 - 2 4 )
Install the front wheel hub and front wheel. ( W 7 - 1 3 , 14)