Nameplate - Bosch KB069 RW Series Translation Of Original Operating Instructions

3.2

Nameplate

The nameplate is situated on the frame. The
precise position of the nameplate is shown in
Figure 3.
Figure 2: Example KETTLER nameplate
No. Designation
1 CE marking
2 Manufacturer
3 Type number
4 Maximum continuous power rating
Maximum permitted total weight
5
(PTW)
6 Year of manufacture
7 Pedelec type
8 Safety markings
9 Disposal instructions
10 Area of use
Weight of the ready-to-ride pedelec
11 (optional; only for pedelecs 25 kg or
more)
12 Shut-off speed
Table 11: Explanation of information on the nameplate
MY23K0a - 52_1.0_02.09.2022
KETTLER
Alu-Rad GmbH
Longericher Str. 2
50739 Köln, Germany
Typ:
KB084-NXRW
3
EPAC
nach
EN 15194
0,25 kW / 25 km/h
4
zGG 180 kg
5
EPAC 25 kg
6 BJ 2023
7
8
Description
The CE marking is a declaration by the manufacturer that the pedelec
complies with applicable requirements.
You can contact the manufacturer at the address indicated.
All pedelec models have a nine-digit type number, which is used to specify
the design model year, the type of pedelec and the version.
The maximum continuous power rating is the greatest possible power for
the electric motor output shaft over 30 minutes.
The maximum permitted total weight is the weight of the fully assembled
pedelec with the body weight plus the baggage.
The year of manufacture is the year in which the pedelec was
manufactured.
Each pedelec is assigned a pedelec type, which determines its proper use,
function and area of use.
Safety markings warn of hazards.
Follow the guidelines on waste disposal when disposing of the pedelec.
Ride pedelec in permitted locations only.
The weight of the ready-to-ride pedelec is specified as a weight of 25 kg or
above and refers to its weight at the time of purchase. Any extra
accessories need to be added to the weight.
The speed that the pedelec reaches at the moment when the current has
dropped to zero or to the no-load current value.
The nameplate contains up to twelve pieces of
information.
2
1
12
11
10
9
Overview
More
information
Appendix
Section 1.1
Section 1.6
Section 3.1.3
Section 3.1.1
Section 2.7
Section 10.1
Section 3.1.5
Section 4.1
31