General Safety; Special Safety - Unitronics UG-ULK-1616P2-M2P6 User Manual

2.2 General Safety

This equipment should only be installed, operated, serviced and maintained by
qualified personnel. Qualified person is a person who has skills and knowledge
concerning the construction and operation of electrical equipment, and its installation,
and has received safety training to recognize and avoid the hazards involved.
There shall be a statement in the instructions that if the equipment is used in a manner not
specified by the manufacturer, the protection provided by the equipment may be impaired.
User modifications and/or repairs are dangerous and will void the
warranty and release the manufacturer from any liability.
Product maintenance can only be carried out by our personnel.
Unauthorized opening and improper servicing of the product can
result in extensive equipment damage or possibly personal
injury to the user.
In the event of a serious malfunction, discontinue use of the equipment. Prevent
accidental operation of the device. If repairs are required, please return the device to
your local representative or sales office.
It is the operating company's responsibility to comply with locally applicable
safety regulations.
Store unused equipment in its original packaging. This provides the best
protection against impact and moisture for the device. Please ensure that the
ambient conditions comply with this relevant regulation.

2.3 Special Safety

A process started in an uncontrolled manner may endanger or be
exposed to other equipment, therefore, before commissioning,
make sure that the use of the equipment does not involve risks that
may endanger other equipment or be endangered by other
equipment risks of.
Power Supply
This device can only be operated with a current source of limited power, that is, the
power supply must have overvoltage and overcurrent protection functions.
To prevent the power failure of this equipment, affecting the safety of other equipment;
or the failure of external equipment, affecting the safety of this equipment.
5
UG_ULK-0808P-M8P6