Safety Instructions; Safety Symbols - Unitronics UG-ULK-1616P2-M2P6 User Manual

2. Safety Instructions

2.1 Safety Symbols

Read these instructions carefully and inspect the equipment before attempting to
install, operate, repair, or maintain it. The following special messages may appear
throughout this document or on the equipment to indicate status information or to
warn of potential hazards.
We divide the safety prompt information into four levels: "Danger", "Warning", "
Attention", and "Notice".
DANGER
WARNING
ATTENTION
NOTICE
This is the DANGER symbol, which indicates an electrical hazard
exists which, if instructions are not followed, will result in personal
injury.
This is a WARNING symbol, which indicates an electrical hazard
exists which, if instructions are not followed, could result in personal
injury.
This is the "Attention" symbol. Used to warn you of a potential
personal injury hazard. Observe all safety instructions following this
symbol to avoid injury or death.
This is the "Notice" symbol, which is used to warn the user of
possible
4
indicates a severely hazardous situation which,
if not avoided, will result in death or serious injury.
indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
used to prompt information not related to personal injury
risks. Failure to observe this regulation may result in faulty of device.
UG_ULK-1616P2-M2P6