Omron CJ Series Connection Manual page 23

10
The dialog box on the right is
displayed. Click the Yes Button.
11
Confirm that the
CX-Programmer and the PLC
are normally connected online.
is shown during
*The icon
online connection.
Additional Information
If the CX-Programmer and PLC are not connected online, please check the connection of the
cable. Or, return to step 5, check the settings that were set in steps 6 to 8, and try again.
Refer to Connecting Directly to a CJ2 CPU Unit Using a USB Cable in Chapter 3
Communications in PART 3: CX-Server Runtime of the CX-Programmer Operation Manual
(Cat. No. W466) for details.
Additional Information
The dialogs explained in the following procedures may not be displayed depending on the
environmental setting of CX-Programmer. For details on the environmental setting, refer to
Options and Preferences in Chapter 3 Project Reference in PART 1: CX-Programmer of the
CX-Programmer Operation Manual (Cat. No. W466).
This document explains the setting procedure when the Confirm all operations affecting the
PLC Check Box is selected.
7．Connection Procedure
20