Set Word Clock Output To Single Speed - RME Audio M-32 AD Pro II-D User Manual

enables the channels.
Example:
A routing is created at 96 kHz with 32 channels, sending the MADI coaxial Input 1-32 to optical MADI
Output 1-32. If the sample rate is now changed to 176.4 kHz and the 56 Ch frame is activated, only the
first 14 channels of MADI coaxial input are routed to the optical output. Switching the sample rate to 44.1
or 48 kHz will reveal the previous routing for 32 channels.

11.4. Set Word Clock Output to Single Speed

At sample rates > 48 kHz, it may be necessary to synchronize two devices with a fraction of the actual
sample rate:
Sample Rate
88.2 kHz
96 kHz
176.4 kHz
192 kHz
To set the Word Clock output to single speed on the device:
1. Open the CLOCK section.
2. Move the cursor onto the toggle switch Word Out Single and push the encoder to change the value.
To set the Word Clock output to single speed on the web remote:
1. Locate the CLOCK section.
2. Move the cursor onto the Word Out Single switch and push the encoder to change the value.
RME M-32 AD Pro II-D User's Guide
Word Clock Full Speed (default)
88.2 kHz
96 kHz
176.4 kHz
192 kHz
11.4. Set Word Clock Output to Single Speed | 51
Word Clock Single Speed
(option)
44.1 kHz
48 kHz
44.1 kHz
48 kHz