Table of Contents
Advertisement
3.6. Channel Labels with Integrated Metering
The use of customized channel labels helps in recurring and permanent installations. They inform the
user where the analog connections terminate.
The M-32 AD Pro II-D features 32 fields on the front panel, one for each analog input. Integrated backlight
in shades of green, yellow, and red represents the current level for each channel.
3.7. Meter Backlight Color and Intensity Reference
The following table describes the signal level represented by the backlight color. Each value corresponds
to full scale, which is equivalent to the reference level of the corresponding input.
Color
3.8. Replacing the Channel Labels
No tools are required to replace the channel labels. All 32 labels are printed or written onto a single
sheet.
Perform the following steps to replace the labels:
1. On the left side of the cover, place your fingertip into the recess and gently pull the cover towards you.
8 | 3.6. Channel Labels with Integrated Metering
RME M-32 AD Pro II-D User's Guide
Color name
Green
Yellow
Orange
Red
Red flashing fast
Red flashing slow
dBFS
-54 (barely visible in low light)
-40 (barely visible in daylight)
-20 (bright green)
-5 (strong yellow)
-4
-1
0 (at least three consecutive samples)
input muted
Advertisement
Table of Contents
