Connecting To Com4 (3Cpu16/3Cpusg) - Emerson FB3000 Instruction Manual

2.10.4

Connecting to COM4 (3CPU16/3CPUSG)

You can configure COM4 on the CPU personality module for RS-485 (2-wire)
communications. When connecting COM4 to an RS-485 port on another device (such as a
Rosemount 4088B transmitter), use a cable with configurations as shown below.
Figure 2-28. Wiring COM4 on the CPU Module for RS-485 (2-wire) and Connecting to a
4088B Transmitter
1
2
3
Installation
Enable AC termination using switches
RS-485 bus, twisted pair required
Connect cable shields to suitable Instrument Earth connection point
FB3000 RTU Instruction Manual
D301851X012
November 2023
37