Emerson FB3000 Instruction Manual page 5

Installation Category:
Altitude:
Humidity:
Electrical Supply Rating:
Ambient Temperature Range:
(Tamb)
Temperature Code:
Vibration:
Locations:
Representative Power Supplies:
Extended Backplane Supported Configurations:
Voltage (Control/Loop)
30V
24V ≤ V < 30V
DC supplied
2000 m
95% to temperatures up to 31
linearly to 50% r.h. at 40
condensing
Input rating:
Controller Circuit:
Field Circuit:
-40 C to +75
o o
T4
1.0 g for 10 to 150 Hz for 30 minutes; 0.5 g for 150
to 2000 Hz for 30 minutes
The Emerson FB3000 Remote Terminal Unit
(RTU) is listed by the Canadian Standards
Association (CSA) as suitable for use in Class I,
Division 2, Groups A, B, C and D hazardous
locations (when installed in a suitably-rated
enclosure), and in Class I, Zone 2, AEX/Ex ec IIC Gc
hazardous locations (when installed in an IP54
enclosure per requirements of standards CSA/UL
60079-0 and CSA/UL 60079-7).
If no suitably-rated enclosure is provided, may
only be used in non-hazardous indoor locations.
24V power supply at 10A to 20A as approved to
standard UL 60950-1.
Typical: Phoenix Contact
Quint-PS/1AC/24DC/10 or
Quint-PS/1AC/24DC/20
Max number of
12MIO/12MIO
Personality Modules
installed
31
31
FB3000 - CSA Approval Information
Issued: November 3, 2023
c decreasing
o
c; max 80 % r.h. non-
o
10.5-30Vdc
Max 5A at10.5 - 30V dc
Max 5A at10.5 - 30V dc
C
Max number of
12MIO/12MIO Personality
Modules with loop power
enabled
26
21
CD9411N
CSA-3