Page 1
FB3000 RTU Coin Cell Battery Field Installation Guide D301875X012 June 2021 FB3000 Remote Terminal Unit (RTU) Coin Cell Battery Field Installation Guide Remote Automation Solutions...
Page 2
Our full-time professional instructors can conduct classroom training at several of our corporate offices, at your site, or even at your regional Emerson office. You can also receive the same quality training via our live, interactive Emerson Virtual Classroom and save on travel costs. For our complete schedule and further information, contact the Remote Automation Solutions Training Department at 800-338-8158 or email us at education@emerson.com.
Page 3
FB3000 RTU Coin Cell Battery Field Installation Guide D301875X012 June 2021 Removing/Replacing the Coin Cell Batteries A 3V lithium coin cell battery (3PBT1) in each of the two power supply modules provides backup power for the SRAM and the real-time clock. These batteries operate continuously with a typical expected cumulative operation of 4900 hours if only one power module is installed or 9800 hours if both power modules are installed.
Page 4
FB3000 RTU Coin Cell Battery Field Installation Guide D301875X012 June 2021 Removing/replacing the Battery in Power Module (3PBT1) To remove the power module: Disconnect the terminal block from the power module you want to remove. Push a flathead screwdriver into the opening in the lower right of the power module and rotate the handle of the screwdriver upwards to rotate the module upwards.
Page 5
FB3000 RTU Coin Cell Battery Field Installation Guide D301875X012 June 2021 Slide the replacement battery in. The positive (+) side with the label must be facing to the right side of the RTU. Push the battery access door back on.
Need help?
Do you have a question about the FB3000 and is the answer not in the manual?
Questions and answers