Emerson FB3000 Instruction Manual page 27

FB3000 RTU Instruction Manual
D301851X012
November 2023
Squeeze hard to remove connector covers on the two mating chassis. You may need to
use both hands.
Figure 2-3. Removing Chassis Connector Cover
Press the two chassis together. If mounting on a DIN rail, slide both chassis onto the DIN
rail first to ensure proper alignment and place clamps/brackets at both ends of assembly
on DIN rail to ensure side connectors between chassis remain fully engaged. (See
Section
2.6).
Figure 2-4. Pressing Chassis Together
Installation 13