Pet immunity
When properly installed and con gured, CombiProtect Fibra does not respond to
pets up to 50 centimetres tall and weighing up to 20 kilograms.
The detector is installed at a height of 2.4 metres without any obstruction to its
view. For example, in a corner where the view will not be blocked by a closet or
other furniture on which a pet can climb.
It is also important to set the required sensitivity in the
High — the detector does not respond to cats (up to 25 cm tall).
Normal — the detector does not respond to small dogs (up to 35 cm tall).
Low — the detector does not respond to pets up to 50 cm tall.
If the detector is installed below the recommended height, then the pets will
move in the high sensitivity zone. If a sheepdog walks on its hind legs or a small
spaniel gets loose on a chair, the detector can raise a false alarm. The detector
will also raise an alarm if the pet can jump to the level of the detector or move
near it.
Why detectors respond to pets and how to avoid this
How to install CombiProtect Fibra correctly
detector settings
:
Need help?
Do you have a question about the CombiProtect Fibra and is the answer not in the manual?