User-Specified Aimer Delay; Aimer Mode; Centering - Honeywell Voyager 147 Series User Manual

User-Specified Aimer Delay

If you want to set your own length for the duration of the delay, scan the barcode
below, then set the time-out by scanning digits (0 - 4,000 ms) from the
Programming

Aimer Mode

This feature allows you to turn the aimer so that it is always on, always off, or in
pulse mode. Pulse mode provides the best scan performance. Always On mode
turns the aimer On while taking a picture. Pulse Mode turns the aimer Off while
taking a picture and pulses the aimer when not taking a picture.
Default = Pulse Mode.

Centering

Use Centering to narrow the scanner's field of view to make sure that when the
scanner is hand-held, it reads only those barcodes intended by the user. For
instance, if multiple codes are placed closely together, centering will insure that
only the desired codes are read.
Note: To adjust centering when the scanner is in the stand, see
Centering
88
* Off (no delay)
Chart, then scan Save.
Always Off
*Pulse Mode
(page 4-80).
Delay Duration
Always On
Presentation
Voyager XP User Guide