Application Work Group Selection; Reset The Factory Defaults: All Application Work Groups - Honeywell Voyager 147 Series User Manual

Application Work Group Selection

This programming selection allows you to assign a scanner to a work group by
scanning the barcode below. You may then program the settings (e.g., beeper vol-
ume, prefix/suffix, data formatter) that your application requires. Default = Group 0.

Reset the Factory Defaults: All Application Work Groups

The following barcode defaults all of the work groups to the factory default set-
tings.
62
* Group 0
Group 2
Group 4
Group 6
PAPDFT&
Factory Default Settings:
All Work Groups
Group 1
Group 3
Group 5
Voyager XP User Guide