Table of Contents
Advertisement
Page Pitch
When you press the Page button on the base or Access Point, the scanners associ-
ated with that base or Access Point will begin beeping (see
set the pitch of the paging beep for each scanner by scanning one of the following
barcodes. Default = Low.
Error Indicators
Beeper Pitch - Base Error
The CCB01-010BT-V1N base can be configured to beep at a particular pitch when
an error occurs, such as transmission problems to a host system. The beeper pitch
codes modify the pitch (frequency) of the error tone the base emits when there is
an error. Default = Low.
Number of Beeps - Base Error
The number of beeps and LED flashes emitted by the CCB01-010BT-V1N base for
an error condition can be programmed from 1 - 9. For example, if you program this
option to have five error beeps, there will be five error beeps and five LED flashes in
Voyager XP User Guide
* Low (1000 Hz)
High (4200 Hz)
* Razz (250 Hz)
High (4200 Hz)
Page
Button). You can
Medium (3250 Hz)
Medium (3250 Hz)
47
Advertisement
Table of Contents
