Pad & Q-Link Controls - Akai MPC X User Manual

3. Data Dial: Use this dial to scroll through the available menu options or adjust the parameter values of the
selected field on the screen.
4. –/+: Press these buttons to increase or decrease the value of the selected field on the screen.
5. Numeric Keypad: If the selected field on the screen is a number, press these numbered buttons as you would
on a standard numeric keypad to enter a value. Press the keypad's Enter to enter it. (A numeric keypad with
additional operations will appear on the screen, as well.)
6. Undo/Redo: Press this button to undo your last action.
Press and hold Shift and press this button to redo the last action you undid.
7. Shift: Press and hold this button to access some buttons' secondary functions (indicated by red writing).
Double-press this button to see which buttons have secondary functions—the buttons will flash for a few seconds.
8. F-Key: Press this button to activate or deactivate the F-Key feature. When active, the six buttons under the
touchscreen correspond to the options shown at the bottom edge of the screen. The F-Key button and those six
buttons will be lit red when active. When inactive, the six buttons under the touchscreen will access their normal
modes instead (Menu, Browser, Step Seq, Sampler, XYFX, and Looper).
Pad & Q-Link Controls
9. Q-Link Knobs: Turn these touch-sensitive knobs to adjust various parameters and settings. The display strip
above each knob indicates the parameter it is controlling. If the display strip shows a meter to indicate its value,
you can touch or turn its Q-Link knob to temporarily show its precise numerical value.
10. Pads: Press these pads to trigger drum hits or other samples in your software. The pads are velocity-sensitive
and pressure-sensitive, which makes them very responsive and intuitive to play. The pads will light up different
colors, depending on how hard you play them (ranging from yellow at a low velocity to red at the highest
velocity). You can also customize their colors.
11. Pad Bank: Press these buttons to access Pad Banks A–D.
Press and hold Shift while pressing these buttons to access Pad Banks E–H. Alternatively, double-press one of
these buttons.
12. Copy/Delete: Press this button to copy one pad to another. When the From Pad field is selected, press the
"source" pad (the pad you want to copy). When the To Pad graphic (of all pads) is selected, press the
"destination" pad. You can select multiple destination pads, and you can select pads in different pad banks. Tap
Do It to continue or Close to return to the previous screen.
Tip: To quickly copy a pad, press and hold Copy, press the source pad, press the destination pad, and then
release Copy.
Press and hold Shift and press this button to delete a pad's sample assignment. When the Delete Pad window
is shown, press any pad/pads whose sample assignments you want to clear. Tap Delete to continue or Cancel
to return to the previous screen.
13. Full Level/Half Level: Press this button to activate or deactivate the Full Level feature. When activated, the pads
will always trigger their samples at the maximum velocity (127), regardless of how much force you use.
Press and hold Shift and then press this button to activate or deactivate the Half Level feature. When activated,
the pads will always trigger their samples at half-velocity (64).
14. 16 Level / Pad Perform: Press this button to activate/deactivate 16 Level. When activated, the last pad that was hit
will be temporarily copied to all 16 pads. The pads will now output the same note number as the initial pad, but a
selectable parameter will be fixed at values that increase as the pad numbers increase (e.g., Pad 1 is the minimum,
Pad 16 is the maximum), regardless of how hard you press them. In the screen that appears, use the Type selector
to choose the parameter: Velocity, Tune, Filter, Layer, Attack or Decay. See
Level to learn more.
Press and hold Shift and press this button to enter Pad Perform mode for the pads. When activated, you can
play musical scales/modes, chords or progressions using the pads while in any mode. See
> Pad Perform Mode to learn more.
Operation > General Features > 16
Operation > Modes
13