Akai MPC X User Manual page 342

AIR Spring Reverb
This is a spatial effect, designed to emulate the sound of a
spring reverb tank.
Delay Analog Sync
Analog Delay is similar to Mono Delay, except that it's
designed to emulate an analog "Bucket Brigade"-style delay.
This delay has a unique character to it that gives a warmer
sound by adding subtle inaccuracies in phase and timing.
Delay Analog
Analog Delay is similar to the Mono Delay, except that it's
designed to emulate an analog "Bucket Brigade"-style delay.
This delay has a unique character to it that gives a warmer
sound by adding subtle inaccuracies in phase and timing.
Delay HP
HP Delay is identical to the Mono Delay, but it uses a
resonant high-pass filter in the delay line.
Delay LP
LP Delay is identical to the Mono Delay, but it uses a
resonant low-pass filter in the delay line.
Parameter Value Range
Pre-Delay 0–250 ms
Time 1.0–10.0 s
Mix 0–100 (dry–wet)
Diffusion 0–100%
Width 0–100%
Low Cut 20.0 Hz –1.0 kHz 141 Hz
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Time 1 bar – 1/16 triplets 1/4
Feedback 0–100
Ramp 0–100
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Time 2–2000 ms
Feedback 0–100
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Time 2–2000 ms
Feedback 0–100
Cutoff 0–100
Resonance 0–100
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Time 2–2000 ms
Feedback 0–100
Cutoff 0–100
Resonance 0–100
Default Value
3 ms
4.0 s
50%
100%
0%
Default Value
50
50
50
Default Value
50
100
25
Default Value
50
100
50
33
33
Default Value
50
500
50
50
20
342