Akai MPC X User Manual page 420

Mixer / Filter
Use this tab to control EQ for Oscillator 2, set the levels of the oscillators and effects, and edit the low-pass filter.
Parameter
Osc 2 EQ Gain
Frequency
Drive
Keytrack
Mixer Osc 1
Osc 2
Sub Osc
Ring Mod
Drive
LP Filter Cutoff
Reso
Slope
Saturation
Env
Keytrack
Description
Amount of gain applied to the selected Frequency.
Center frequency for the equalization band.
Amount of drive added to the EQ signal.
Ties the EQ settings to the pitch being played
Level of Oscillator 1.
Level of Oscillator 2.
Level of the Sub Oscillator.
Level of Ring Modulation effect.
Level of Drive effect.
Center frequency of the low-pass filter cutoff.
Amount of resonance of the low-pass filter.
Amount of attenuation applied above the cutoff
frequency.
Amount of saturation applied to the low-pass filter.
Percentage of the envelope output subtracted from or
added to the LP Filter Cutoff.
Ties the LP Filter Cutoff to the pitch being played.
Value Range
-48 – 0 – +48 dB
25–10,000 Hz
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
0–24 dB/oct
0–100%
-100 – 0 – +100%
0–100%
420