Akai MPC X User Manual page 472

AIR Hype
(continued)
Setup
Use this tab to adjust the plugin setup parameters.
Parameter
Setup Transpose
Tune
Glide Time
Glide Mode
Mode
Del-Rev
Volume
MIDI Control
Mod Wheel Destination
Depth
LFO
Aftertouch Destination
Depth
LFO
Control LFO Sync
Rate
Shape
Description
Transposition of the plugin, in semitones.
Fine tuning of the plugin, in cents.
Amount of time to slide from the pitch of one note to
the next note played.
Enables or disables pitch gliding for all triggered
notes or legato notes.
Sets the plugin to polyphonic or monophonic
Level of the delay and reverb signals.
Overall level of the plugin.
Send Mod Wheel data to one of the following control
destinations.
Amount of modulation applied.
When Destination is set to Pitch: -12.0 – +12.0
When Destination is set to Cutoff, Reso, Amp or Pan: -100 – 0 – 100%
Ties the modulation to the Control LFO.
Send Aftertouch data to one of the following control
destinations.
Amount of modulation applied.
When Destination is set to Pitch: -12.0 – +12.0
When Destination is set to Cutoff, Reso, Amp or Pan: -100 – 0 – 100%
Ties the modulation to the Control LFO.
Enables or disables Control LFO sync, and sets how
the Control LFO is synced when enabled.
Speed of modulation of the Control LFO.
When Sync is set to First Note or Each Note: 0.03 – 30.00 Hz
When Sync is set to BPM & Note or BPM & Beat: 8/4 – 1/64
Waveshape of the Control LFO.
Value Range
-36 – 0 – +36
-100 – 0 – +100
0 ms – 32 s
Off, Legato, All
Poly, Mono
-inf – 0.0 – +6.0 dB
-inf – 0.0 – +6.0 dB
Pitch, Cutoff, Reso, Amp,
Pan
Off, On
Pitch, Cutoff, Reso, Amp,
Pan
0–100%
Off, On
Off, First Note, Each
Note, Tempo + Note,
Tempo + Beat
Sine, Triangle, Sawtooth,
Square, S&H Random,
S&H Alternate, Random
Drift, Slow Drift
472