Program - Akai MPC X User Manual

Program

This tab is where you can assign clips to each pad and adjust the program's overall tuning and quantization.
To assign a sample to a pad, press or tap a pad to select it (it will play its assigned samples, if any). Tap the
Sample field, and then use the data dial or –/+ buttons to select a clip. Alternatively, double-tap the Sample field,
and then tap a clip to select it.
To clear the assigned clip from a selected pad, assign a sample to a pad, but select None.
Coarse lets you transpose the program up to 36 semitones up or down.
Fine provides fine-tuning of the program up to 99 cents up or down.
Use the Launch Quantize field to set the quantization of the program in bars (or subdivisions of a bar).
258