Akai MPC X User Manual page 498

Tape Stop
The touch strip controls a tape stop effect that emulates the
slowing down of analog tape playback.
Phaser
The touch strip controls a phaser effect, created by multiple
ganged all-pass filters to create "notches," or sharp spikes,
in the frequency spectrum. The frequencies of these all-pass
filters can be modulated by an LFO to create a sweeping
sound.
Comb Filter
The touch strip controls a comb filter, which creates
"notches" in the frequency spectrum, similar to the phaser,
by delaying the audio signal and adding it back to itself.
Washout
The touch strip controls an echo effect that is useful for
creating transitions.
Parameter Value Range
Cutoff 40.00–10000 Hz
Manual Stop 1.00 – 4.00 s
Time
Sync Stop Off, 1/4, 1/4t, 1/8,
Time 1/8t, 1/16, 1/16t,
1/32, 1/64
Parameter Value Range
Feedback 0.0–100.0%
Manual Speed 0.10–50.00 Hz
Sync Speed Off, 2 Bars, 1 Bar,
1/2, 1/4, 1/4t, 1/8,
1/8t, 1/16, 1/16t,
1/32, 1/64
Parameter Value Range
Feedback 0.0–100.0%
Manual Speed 0.10–50.00 Hz
Sync Speed Off, 2 Bars, 1 Bar,
1/2, 1/4, 1/4t, 1/8,
1/8t, 1/16, 1/16t,
1/32, 1/64
Parameter Value Range
Cutoff 40.00–9000 Hz
Resonance 0.00–100.00%
Feedback 0.00–100.00%
Diffusion 0.0–10000.0%
Delay Time 1 Bar, 1/2, 1/4,
1/4t, 1/8, 1/8t,
1/16, 1/16t, 1/32,
1/64
Default Value
2530.00 Hz
2.50 s
Off
Default Value
100.0%
Off
1/4
Default Value
100.0%
Off
1/4
Default Value
1160.00 Hz
0.50%
0.50%
5000.0%
1 Bar
498