Eq/Filter - Akai MPC X User Manual

Mother Ducker Input
Add this effect as an insert to the track you want to use as a
trigger input, such as a kick drum track.
Mother Ducker
Add this effect as an insert to the track you want to have the
ducking effect applied to. Use the meters to monitor the
level from your trigger input and tweak the Threshold and
Ratio parameters to adjust the amount of ducking. The
Attack and Release parameters can be used to sculpt the
envelope of the gain reduction to achieve exactly the
pumping effect you are after. Mother Ducker has eight
internal buses so you can set up multiple channel strips with
ducking effects from different sources.
Transient Shaper
A transient shaper can be used to enhance or soften the
Attack and Release phases of audio material.

EQ/Filter

Options: Options: AIR
Filter Sweep, HP Filter
Shelving Filter, PEQ 2-Band,
AIR Enhancer
This effect enhances the low and high
broadband frequencies of the audio signal.
Enhancer, AIR Filter Gate,
Sync, HP Filter, HP Shelving
2-Shelf, PEQ 4-Band
Parameter
High Gain
Low Gain
Output
Freq. High
Freq. Low
Harmonics
Phase
Parameter Value Range
To Bus 1–8
Parameter Value Range
Ratio 1.00:1 – 60.00:1
Knee
Attack
Release
Threshold
Gain -100.000 – +12.000 dB -0.000 dB
Auto Gain On, Off
From Bus 1–8
Parameter
Dry/Wet
Attack
Release
Output
AIR Filter, AIR Kill EQ,
Filter, LP Filter
Value Range
0.0 – 12.0 dB
0.0 – 12.0 dB
- Inf – 0.0 dB
1.0 – 10.0 kHz
40.0 – 640 Hz
0.0 – 12.0 dB
+ (positive), - (negative)
0.000 – 6.000 dB
1.0 – 1000.0 ms
1.0 – 1000.0 ms
-100.000 – 0.000 dB
Value Range
0–100 (dry–wet)
0–100
0–100
0–100
AIR Para EQ, AIR Vintage
Sweep, LP Filter Sync,
Default Value
Bus 1
Default Value
6.00:1
0.000 dB
10.0 ms
100.0 ms
-6.021 dB
On
Bus 1
Default Value
100
50
50
50
Filter*, HP
LP Filter, LP
Default Value
0.0 dB
0.0 dB
0.0 dB
3.16 kHz
160 Hz
0.0 dB
+
351