Wayoutware Odyssey - Akai MPC X User Manual

WayOutWare Odyssey

(continued)
Mod/Env
Use this tab to adjust the settings for the low frequency oscillator,
sample and hold generator, and envelope generator.
Parameter
LFO LFO Tempo
Sync
LFO Speed
Sample/Hold Trigger
Source 1
Source 2
VCO-1
Depth
Lag
AR Attack
Release
Trigger Source Determines the input source sent to the AR
ADSR Attack
Decay
Sustain
Release
Trigger Source Type of input to trigger the envelope generator. KYBD Gate, LFO Repeat
Repeat
Description
Determines whether LFO speed is free floating
or synced to project tempo.
Speed of the low frequency oscillator.
Determines the source signal for triggering the
Sample and Hold mixer, either the Low
Frequency Oscillator or the pitched Keyboard
output.
Selects the VCO-1 waveform or pulse width
modulation as Sample and Hold input.
Selects a noise generator or the VCO-2 pulse
width modulation as Sample and Hold input.
Level of the VCO-1 input.
Level of the noise or VCO-2 input.
Adjusts the smoothing of the Sample and Hold
output voltage.
Attack time of the AR envelope generator.
Release time of the AR envelope generator.
envelope generator.
When set to KYBD Gate, the envelope
generator is triggered by key input.
When set to LFO Repeat, the envelope
generator is trigger by the LFO pulse wave.
Attack time of the ADSR envelope generator.
Decay time of the ADSR envelope generator.
Sustain time of the ADSR envelope generator.
Release time of the ADSR envelope generator.
When Trigger Source is set to LFO Repeat,
select KYBD Repeat for the LFO to trigger only
when a key is pressed, or select Auto Repeat
for the LFO to trigger automatically without key
input.
Value Range
Off, On
When Sync is Off: 0.0925 – 20.0000 Hz
4/4 – 1/64 beats
When Sync is On:
LFO Trigger, Kybd Trigger
Saw, Pulse
Noise, Pulse
0.0–100.0%
0.0–100.0%
0.0–100.0%
0.003 – 10.000 seconds
0.003 – 10.000 seconds
KYBD Gate, LFO Repeat
0.003 – 10.000 seconds
0.003 – 10.000 seconds
0.000 – 10.000 V
0.003 – 10.000 seconds
KYBD Repeat, Auto Repeat
482