Table of Contents
Advertisement
e
w
30–32 mm (10 stitches)
B
A
q
16
11. Stitch Length
The stitch length should be 30–32 mm when the stitch
length dial is set at 3 and differential feed dial at 1.0.
z Remove the belt cover.
x Set the stitch length dial q at 3 and differential feed
dial w at 1.0.
c Place a piece of paper under the presser foot.
Lower the foot and turn the handwheel toward you
about 15 times.
Measure the distance of needle marks of 10 stitches.
The distance should be 30–32 mm.
v Turn the adjusting screw e to adjust the stitch length.
• If the stitch length is longer than 32 mm, turn the
adjusting screw in the direction A.
• If the stitch length is shorter than 30 mm, turn the
adjusting screw in the direction B.
b Attach the belt cover.
Advertisement
Table of Contents
