GE NetworX NX-8-EUR Installation Manual page 61

LOCATION 54 - DAYS OF THE WEEK "ARM ONLY AFTER CLOSE WINDOW" CODES FUNCTION IN PARTITIONS 1
THRU 8 (8 Segments, feature selection data)
Location 54 selects the days of the week on which each partition is open. On these days, "arm
only after close window" codes will be able to arm and disarm during "open window". On days
not selected here, "arm only after close window" codes will not disarm. Segment 1 is for
partition 1, and segment 8 is for partition 8 (see locations 52 and 53 for the opening and
closing times for the open days).
Segment 1-8
LOCATION 55 - DAYS OF THE WEEK FOR AUTO ARMING IN PARTITIONS 1 THRU 8 (8 Segments, feature selection
data)
Location 55 selects the days on which each partition will auto-arm. Segment 1 is for partition
1, and segment 8 is for partition 8. If a zone is faulted before the warning timer and stays
faulted during the warning timer, the zone will automatically be bypassed. If the zone restores,
it will be unbypassed and active in the system.
Segment 1-8
NX-8-EUR Installation manual
1 = "Arm only after close window" will arm/disarm on Sunday
2 = "Arm only after close window" will arm/disarm on Monday
3 = "Arm only after close window" will arm/disarm on Tuesday
4 = "Arm only after close window" will arm/disarm on Wednesday
5 = "Arm only after close window" will arm/disarm on Thursday
6 = "Arm only after close window" will arm/disarm on Friday
7 = "Arm only after close window" will arm/disarm on Saturday
8 = Reserved
1 = Auto arming on Sunday
2 = Auto arming on Monday
3 = Auto arming on Tuesday
4 = Auto arming on Wednesday
5 = Auto arming on Thursday
6 = Auto arming on Friday
7 = Auto arming on Saturday
8 = Disable retry timer
Page 61 02/07/06