Entry/Exit Timers - GE NetworX NX-8-EUR Installation Manual

Segment 5

Entry/Exit timers

LOCATION 24 - ENTRY / EXIT TIMERS (6 segments, numerical data)
Location 24 is used to program the entry/exit times. There are 2 separate entry/exit times.
Segment 1
Segment 2
Segment 3
Segment 4
Segment 5
Segment 6
NX-8-EUR Installation manual
1 = On: Disables auto-bypassing of force armable zones at the end of the
exit delay
2 = Reserved
3 = Reserved
4 = Reserved
5 = Reserved
6 = Reserved
7 = Reserved
8 = Reserved
Entry time 1 This is the entry time that will be used when a delay 1
zone type initiates an entry delay.
Valid entries are 10-255 seconds.
Exit time 1 This is the exit time that will be used for all zones
designated as delay 1.
Valid entries are 10-255 seconds.
Entry time 2 This is the entry time that will be used when a delay 2
zone type initiates an entry delay.
Valid entries are 10-255 seconds.
Exit time 2 This is the exit time that will be used for all zones
designated as delay 2.
Valid entries are 10-255 seconds.
Reserved
Reserved
Page 46 02/07/06