Table of Contents
Advertisement
LOCATION 48 - AUXILIARY OUTPUT 2 (relay 2 and open collector 2), EVENT AND TIME (2 segments, numerical
data)
Segment 1
Segment 2
LOCATION 49- AUXILIARY OUTPUT 3 (open collector 3), EVENT AND TIME (2 segments, numerical data)
Segment 1
Segment 2
LOCATION 50- AUXILIARY OUTPUT 4 (open collector 4), EVENT AND TIME (2 segments, numerical data)
Segment 1
Segment 2
NX-8-EUR Installation manual
Use the chart below to select the event that will activate auxiliary output 2
(relay 2)
Program the timing from 0-255 (minutes or seconds, depending on the
data programmed in segment 2, location 46). Programming a "0" makes
the output follow the event
Use the chart below to select the event that will activate auxiliary output 3
Program the timing from 0-255 (minutes or seconds, depending on the
data programmed in segment 3, location 46). Programming a "0" makes
the output follow the event
Use the chart below to select the event that will activate auxiliary output 4
Program the timing from 0-255 (minutes or seconds, depending on the
data programmed in segment 4, location 46). Programming a "0" makes
the output follow the event
Page 58
02/07/06
Advertisement
Table of Contents
Need help?
Do you have a question about the NetworX NX-8-EUR and is the answer not in the manual?
Questions and answers