GE NetworX NX-8-EUR Installation Manual page 52

LOCATION 33 - ZONES 33-40 CONFIGURATION GROUP (8 segments, numerical data)
Location 33 contains the configuration group (zone type) for zones 33-40. Segment 1 is for
zone 33, and segment 8 is for zone 40. You will find the default configurations in the table
above.
LOCATION 34 - PARTITION SELECT, ZONES 33-40 (8 segments of feature selection data)
Location 34 is used to select the partition(s) in which zones 33-40 reside. A zone may reside in
any combination of the 8 partitions. If a burglary zone resides in more than 1 partition, that
zone will only be active when all the partitions are armed. A zone that resides in more than 1
partition will be reported to its lowest partition. Segment 1 corresponds to zone 33 and
segment 8 corresponds to zone 40.
Segment 1-8
LOCATION 35 - ZONES 41-48 CONFIGURATION GROUP (8 segments of numerical data)
Location 35 contains the configuration group (zone type) for zones 41-48. Segment 1 is for
zone 41, and segment 8 is for zone 48. You will find the default configurations in the table
above.
LOCATION 36 - PARTITION SELECT, ZONES 41-48 (8 segments, feature selection data)
Location 36 is used to select the partition or partitions in which zones 41-48 reside. A zone
may reside in any combination of the 8 partitions. If a burglary zone resides in more than 1
partition, that zone will only be active when all the partitions are armed. A zone that resides in
more than 1 partition will be reported to its lowest partition. Location 36 has 8 segments.
Segment 1 corresponds to zone 41 and segment 8 corresponds to zone 48.
Segment 1-8
NX-8-EUR Installation manual
1 = Partition 1
2 = Partition 2
3 = Partition 3
4 = Partition 4
5 = Partition 5
6 = Partition 6
7 = Partition 7
8 = Partition 8
1 = Partition 1
2 = Partition 2
3 = Partition 3
4 = Partition 4
5 = Partition 5
6 = Partition 6
7 = Partition 7
8 = Partition 8
Page 52 02/07/06